Tactile studs ST-54

Stainless steel tactile paving studs with anti-slip surface — type ST-54

Surface mounted warning studs made of stainless steel are produced in two formats:  Ø35 mm or Ø25 mm
They are made in accordance with the international norm ISO 23599/2012 in various versions and are suitable (as a tactile orientation system for blind and visually impaired people) for indoor applications.
There is non-abrasive slip-resistant tape (colour options) applied on the top of the studs.
Two material options:
……AISI 303 stainless steel (1.4305)
……AISI 316 stainless steel (1.4401)
Tactile studs (tactile truncated domes) are available in 3 versions:
— with pin (for fixation into pre-drilled holes in floors)
— without pin (for fixation using additional glue like MAMUT or similar)
— self-adhesive with high-quality AFT adhesive tape

Order numbers of all versions are mentioned below the following photos of stainless steel tactile studs.

Available versions with order numbers:

ST-5401      Tactile stud Ø35/25×4,5 mm (AISI 303) anti-slip tape (on the top) MILLED, without pin
ST-5401-P  Tactile stud Ø35/25×4,5 mm (AISI 303) anti-slip tape (on the top) MILLED, with pin
ST-5401-S  Tactile stud Ø35/25×5 mm (AISI 303) anti-slip tape (on the top) MILLED, self-adhesive (AFT tape)

ST-5451      Tactile stud Ø35/25×4,5 mm (AISI 316) anti-slip tape (on the top) MILLED, without pin
ST-5451-P  Tactile stud Ø35/25×4,5 mm (AISI 316) anti-slip tape (on the top) MILLED, with pin
ST-5451-S  Tactile stud Ø35/25×5 mm (AISI 316) anti-slip tape (on the top) MILLED, self-adhesive (AFT tape)